Views: 0 Author: Site Editor Publish Time: 2023-08-24 Origin: Site
Do not work at a distance of less than 1.5m from the conveyor belt carrying the raw material.
Before turning on the power, the electric chain saw switch must be closed to prevent accidental starting.
Before cutting, start the electric chain saw without load for 1 minute to check if it is running normally.
When starting or operating the electric chain saw, hands and feet must be kept away from rotating parts, especially above and below the chain.
When the fuse is burned or the relay trips, an immediate inspection should be carried out.
Overloading the power supply and installing high-capacity fuses is not allowed.
The electric chain saw must be operated with both hands.
When working, stand firmly and do not stand below or on the raw material or timber that may roll.
When removing jammed saws, pay special attention to the safety of any assisting personnel.
Lubricate and cool the saw mechanism during the operation at all times.
When the raw material is about to be cut, pay attention to the movement of the timber and quickly lift the electric chain saw after the cut.
Before transferring the electric chain saw, turn off the switch and do not operate it during transportation.
